Powerful - Delivers up to 1,400 in. lbs. of torque; Lightweight - allows the user to work longer with less fatigue; Durable - equipped with a heavy-duty, die-cast, aluminum gear housing for extreme durability; Hard hitting - produces up to 2500 impacts per minute; Limited warranty;

The SuperCut with Carpenter kit-includes : Fein SuperCut FSC 2.0 tool, carrying case, wrench and Carpenter Kit; Variable speed tool; 15 foot power cord; 3-year warranty possible; Hex mounting system provides blade locking for better torque transfer;

.;

.;

.;

.;

The Paslode 402500 is a replacement battery for the Paslode 900078NT IM200-S16 16-Gauge Cordless Standard Crown Stapler. With the 402500 Impulse Battery you have the power to drive up to 4,000 staples in a single charge. Keep a few on hand to minimize downtime and increase productivity. Attention International Customers Paslode products cannot be shipped outside of the USA.

The DeWalt DC550 is a Heavy-Duty 18V Cordless Cut-Out Tool. The cordless tool also features tool-free bit changes for less downtime and more productivity. Other great features include a slim body design, a dust sealed switch and an adjustable guide. The battery, charger, and case are not included.

The DeWalt DC550KA is a Factory Reconditioned Heavy-Duty 18V Cordless Cut-Out Tool. The tool has all the features of the DeWalt DW660 cut-out tool, but in the convenience of cordless. The cordless cut-out tool has a 26000 RPM motor that cuts through drywall, plywood, ceramic tile, plexiglas, cement board, countertops and acoustical ceiling tile. It offers a tool-free bit change, so no longer waste time looking for lost wrenches and a dust-sealed switch to prevent contamination and allow for longer motor life.

When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tools yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode IM200-S16 is a great example of this innovation. This light stapler packs a hefty punch for only weighing 6.3 pounds. Its able to drive 3/4 to 2 fasteners with ease into the hardest of woods, making the IM200-S16 Standard Crown Stapler very versatile. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers Paslode products c

The Milwaukee 9083-22 is a 14.4V 1/2 Cordless Impact Wrench Kit. The powerful impact wrench delivers 1404 in-lbs of torque and offers power, performance and durability in the convenience of a small package. It is light weight and is equipped with heavy-duty, die-cast, aluminum gear housing for extreme durability. The light weight and compact tool helps to work for a long time with less fatigue. The 1/2 impact driver is hard hitting and produces up to 3500 impacts per minute.

The Makita 18V LXT Lithium-Ion Cordless Impact Driver is a lightweight but powerful impact driver, weighing just over 3 pounds. The light weight combined with the ergonomic shape of the tool make this a very comfortable and easy to handle tool. Lithium-Ion technology gives this impact driver longer run time, add to this a 30-Minute Rapid Charger and you get a more efficient tool with less down time for charging. Built-in L.E.D. lights illuminate your work area for added precision.

The DeWalt Factory Reconditioned DC212KA is a Heavy-Duty 18V Cordless 7/8" SDS Hammer. The SDS hammer features electro-pneumatic hammer mechanism for fast penetration and low vibration. Its compact L-Shape design allows access in tight spaces while providing optimal balance for the user. The hammer has 360 side handle for better control and ease of use in tight spaces. Its shocks has active vibration control which significantly reduces vibration and increases user comfort and productivity.

The Milwaukee 9079-22 is a 18V 1/2 Cordless Impact Wrench Kit. It produces up to 240 ft-lbs of torque and features one of Milwaukees rugged DC motors. Removing lug nuts from vehicle tires, driving large lag bolts deep into wood and augering large holes in telephone poles can easily be accomplished with the Milwaukee impact wrench.

The DeWalt DC490KA Cordless Shear is powered by a high performance 18V motor, which can slide right through wood, plastic and sheet metal. This Cordless shear has an 18 gauge, 360 swivel head that can cut into any corners and adds to the versatility, control and comfort.With an 18-28 gauge capacity in steel the DeWalt Cordless Shear blades cut 0 to 2,300 spm with a minimum cutting radius of 5.5and remove a 7/32 inch metal strip which rolls out of the operational area, providing consistent and accurate cuts. The cordless mobility means that the electric tool can be taken to the work piece, and the tool weighs just 6.1 lbs. The motor is internally fan-cooled for easier handling and durability. The replaceable brushes add to the serviceability of the tool.The DeWalt DC490KA Cordless Shear operates at 18 V with a XRP extended run-time battery that provides long run-time and battery life for the kit. The Kit includes shear, blade wrench, one-hour charger, two DC9096 18V XRP Battery Packs, a

The Makita TD020DSEW is a Factory Reconditioned 7.2-Volt Lithium-Ion Cordless Impact Screw Driver Kit. It features a durable hinge mechanism which allows conversion from pencil to pistol grip operation. The impact mechanism ensures easy operation with reduced reaction force and the design allows for manual screw driving. It has built-in LED job light for excellent work efficiency in dimly lit work spaces. It is ideal for screw driving in tight, confined spaces.

The DeWalt DC490KA is a Factory Reconditioned Heavy-Duty 18V Cordless 18 Gauge Swivel Head and Shear Kit. It is powered by a high-performance 18V motor with fan cooling and replaceable brushes. Its blades cut 0 to 2300 SPM and remove a 7/32 metal strip, which continuously curls out of the cutting area. The head can swivel 360 for maximum versatility, control and comfort.

The Makita BGA452Z is a 18V LXT Lithium-Ion Cordless Cut-Off/Angle Grinder Tool Only. The Makita BGA452Z Cut-off/angle grinder has a Makita built motor which delivers 50% faster grinding with an impressive 10,000 RPM. The Makita BGA452Z has more compact design at only 12-1/2 inch long and weighs only 5.6 lbs for less operator fatigue. The Makita BGA452Zs ergonomic shape fits like a glove with even pressure and easy control.

The DeWalt DC413BK is a 28-Volt Cordless 4-1/2 Inch Cut-Off Tool With NANO Technology - Tooly Only w/ Case. The DC413BK can be easily toted to out-of-the-way jobs (it weighs just 7.2 pounds and is svelte enough to fit in tight spaces). And unlike reciprocating saws, which can also slice pipes, this cutoff tool features swappable cutting wheels and discs that let you tackle varied tasks.Batteries and Charger are NOT Included.

The Makita BTL063Z Cordless Angle Impact Wrench Tool Only features LXT Lithium-Ion battery technology. The LXT Lithium-Ion battery optimum charging system produces 430% the total lifetime work of other batteries and 2.5x more cycles. On top of that, the BTL063Z is compact enough to reach into tight spaces but has enough power for heavy-duty use.